How to Place Rooms
When the Place Room command is active, the user has 2 options for placing the rooms, as a template or as an external cell attached to one of the referencelines.
When Template option is used, the following options are available for input:
- Template Name - the room templates that will be placed on the selected referenceline.
- Active Angle - the rotation angle about the global vertical Z axis.
- Horizontal Offset - the horizontal offset from the alignment.
- Elevation - the vertical offset from the alignment.
- ReferenceLine Offset - the offset from the referenceline.
- Material - the material that will be assigned to the created solid.
- Feature Definition - the feature definition that will be assigned to the created solid.
- Name Prefix- the name prefix that will be assigned to the created solid.
When Cell option is used, the following options are available for input:
- Cell Name - the cell name that will be placed on the selected referenceline.
- Active Angle - the rotation angle about the global vertical Z axis.
- Horizontal Offset - the horizontal offset from the alignment.
- Elevation - the vertical offset from the alignment.
- ReferenceLine Offset - the offset from the referenceline.
- Material - the material that will be assigned to the placed solid.
- Feature Definition - the feature defintion that will be assigned to the placed solid.
- Name Prefix- the name prefix that will be assigned to the placed solid.